Engr. Edward Ang
WEBSITES
Machine Shop Pictures
NOTICE!!!
To be able to view all these
pictures. You need a fast ISP
connection with at least 53.3 Kbps top speed (try your school’s internet
connection), an upgraded computer with a least 1.5 GHz speed and a 6MB RAM
video card. Otherwise, you can slowly wait (or click the REFRESH button) to
download all these pictures but still it might not load totally.
IN USING THE SHOP PROCEDURES
Always make it a point in
asking your instructor for further methods in making these shop projects.
I hope with good sponsors for
a website, I could improve on these setup.
Please inform your classmates
regarding this website, so that it could help them in their shop assignment.
Engr. Edward Ang
Machine Shop Procedures
A. For
Center Punch:
Centering the Toolbit.
Toolbit Facing Operation.
Toolbit Chamfering Operation.
Tapering Operation.
Knurling Operation.
Filing and Polishing your work.
B. For
Key / Keyway:
Measuring the workpiece.
Mounting to the Machinist Vise.
Centering the Toolbit.
This is the series of reciprocating motion to produce
the
plane
surface of the workpiece.
Drilling a hole for slotting and keyway operation.
Slotting Operation.
Keyway Operation.
C. For
Wood Blank Gear:
Tools for Woodlathe Operation.
The equipment.
Indicate and punch the markings on the workpiece.
Slot marking on one side and drill a hole on the other
side.
Mounting the workpiece.
Pencil mark the correct distances on the workpiece.
Use the correct tools in forming the shape of the
blank gear.
Measure for accuracy of the sizes.
Finished Product.
D. For
Gear:
Gearing Operation.
Index Plate
Gear Cutting operation.
The Bender Machine
NOTICE
To be able to view all these
pictures. You need an upgraded
computer with a least 1.5 GHz speed and 6MB RAM video card. Otherwise, you can
slowly wait (or click the REFRESH button) to download all these pictures but
still it might not load totally.
IN USING THE SHOP PROCEDURES
Always make it a point in
asking your instructor for further methods in making these shop projects.
I hope with good sponsors for
a website, I could improve on these setup.
Please inform your classmates
regarding this website, so that it could help them in their shop assignment.
Engr.
Edward Ang