Thanks for taking a look

I have a 6 year old Tappan dishwasher. Model TDB662RBR0 Serial # TH52399330    the appliance model plate also says Frigidaire Co. Dublin OH. The unit was purchased    from Wards. This is a parts diagram for it.

I  needed # 11 Water Seal / # 20 Water Shield / #21 Motor also need the shear pin or key that fits on motor shaft and in the impeller (part #10)

The Impeller (10) does not appear worn, and is not viably damaged in any way.    And the Motor seal (#12) does not shown and signs of leaking.

The water seal part #11 was leaking and the motor was freezing up. The seal was replaced about a year ago and worked find for about nine months.  Then the unit begain to leak slightly again, and the motor was making a grinding noise . Spraying WD40 or Lithium Grease  on the top motor bearing use to allow unit to operate quietly for a month or  more. The top bearing on the motor is now in pieces, and I suspect this bearing  caused the water seal #11 to wear and crack within the year.

I am very disapointed in the unit's design.  The origianal motor should be made to alow access to the bearing for relubercation, and is  just a poor weak design .   I took this origianal motor apart and it does NOT have ball bearings!  Just machined steel floating on a film of oil from a wick,.

Repaired!!!   I got the required parts from Appliance Parts Center Raynham, Ma. and repaired the unit for about $90.  The motor they sent is an Emerson and is bolted together so if it ever needs lubercation i sould be able to disassemble it. I am very pleased with the service at www.apconline.com

Email at ozark_elect@hotmail.com