The Z28 as it arrived from the salvage yard. Notice the position of the front bumber on the drivers side!!! It was touching the hood!! |
||||||||||||||||
You can see in this picture the extent of the bent frame. Actually it is part unibody, there are 2 subframes, one in the rear and the front. The gap proved not to be a problem, all was straightened out to specs. Looked alot worse than it actually was. |
||||||||||||||||
The Z after most of the bent metal is removed. The frame was next in the line of order to straighten. |
||||||||||||||||
Front clip of cut out of another 96 camaro z28. The sheet metal will be mig welded to the front of the car. |
||||||||||||||||