OEM Hauppauge PVR 250
Was a new pull, works perfectly with the drivers and entire capture software package off the Hauppauge website
About 2 years old, works perfectly.
Coaxial cable TV input (will not work with digital cable), SVideo and Left and Right RCA audio inputs.
Looking for $70cad shipped.







Silent P2 400mhz @ 448mhz, 512mb ram, 160gb HD computer
The processor is a Pentium 2, overclocked to 112mhz Front Side Bus via the dipswitches on the MB, which makes it run at 448mhz.
I don't have any CPU support clips, so the CPU rocks back and forth inside the slot, but this has never caused an issue.
The heatsink, an Alpha P60120SB-60B, is Arctic Alumina'd to the processor. It runs warm, but that's it. Plus it's fanless :D
The motherboard is a Gigabyte GA-6ZMA, Revision 1.2, and flashed to the latest BIOS.
It's only issue is that it will lose the current date and time whenever the power supply is unplugged, even after installing a new BIOS battery.
The ram is a 512mb and a 256mb stick of low density Hynix PC133. The 256mb has an IBM label, while the 512mb just has the Hynix sticker.
Because the motherboard is based off the Intel ZX chipset, it will only read half of the 512mb, hence why screenies only show 512mb total memory,
but both memtest and running the computer for many days straight show it to be working rock solid even at only half it's actual size.
The video card comes up as a ATI Rage Fury 8mb and has both RCA and SVIdeo outputs.
The PS is a Forton Sparkle 300 watt unit fitted with a 80mm Panaflo "L" fan running at 5v. This is the only audible part of the computer,
and is so quiet it is barely audible 6 feet away from my head while trying to fall asleep at nite in a very quiet neighbourhood.
The HD is a 160gb Samsung SV1604N, 5400rpm, 2mb cache unit. Sitting in the foam block, and with the eggcrate in front of it, it is inaudible outside the case.
The MB's BIOS detects it as 137gb, but with XP's SP1 or SP2 48bit LBA support I got around that and was able to use the full size of the HD.
The network card is a Intel Pro100+ Management adapter, which is way better than an onboard NIC can ever hope to be.
The MB does have onboard sound, though I never used it.
The case is a $30 cheapo case, but it has front USB's and is in mint condition. No rattles either. 4 internal HD bays + 2 floppies + 4 CDROM.
The only thing's the that the case is missing is the IO backplate for the MB and the PCI slot cover for accessing the screws.
Comes with a LG 16x DVDrom drive.

The machine served as a data transfer and file storage machine, and I controlled it using TightVNC. It always performed flawlessly, never got a lockup or frozen program or anything even remotely abnormal.

The HD cost me $70 in february, ram was $75 and $50 respectively, CPU and MB were $40, DVDrom $20, case $30, PS was $50 with the Panaflo....

Asking $120cad but that is negotiable. Will not ship. Throw me an offer.











1x Bronze 4 D Cell Maglite Flashlights
Brand new in retail packaging, never opened.
Asking $25, retails for $35+ at Canadian Tire. ONE SOLD TO A FRIEND






Pioneer 12" 200 watt Powered Home Theatre Subwoofer
About 5 years old, use very sparingly, watched maybe 5 movies a month through it. Never used to listen to music through, only home theatre/movie usage.
A few months before the warranty expired, the foam surround seperated from the woofer's cone because there was a non-existant layer of glue holding them together.
Yup, it took over half a year to find that. Just goes to show how little it was actually used.
Even now it sits there in the off position, only being turned on whenever my dad wants to watch a flick.
When the Pioneer repair place reglued the surround and cone, I believe they also put a thin string of sealing putty between the driver and box so that it would seal even better then it did before, and they also glued the port to the box.
I remember after they sealed teh sub better, the bass got tighter and a bit louder.
Overall it's a nice sub that'll add a good bit of rumble to any HT, and it's in near mint condition as well.
The only thing is has is a bit of white along the top left edge (visible in the first pic) from rubbing against the wall, but it's not dented or anything.
Literally it's a few spots of white paint sitting on top of the veneer of the sub.
Otherwise it's in mint operating condition.
I should have the original box and manual, possibly cable as well. Really there's nothing to it, but I'm positive I have them.

Asking $200cad, will not ship. Willing to deliver or meetup within a reasonable distance.
Can send more pics or videos of the sub working.








MTX 2150x car amplifier
Missing both right plastic "Iso-feet".
Modified by Aaron of Envision Electronics and the Parts Express message board to operate in Class B mode for reduced heat output.
Still sounds great even when powering mids (Illusion Audio ND504's or Vifa P17's) and has NEVER, EVER overheated or shutdown or hiccuped at all.
Looking for $50usd shipped.




12" TC Sounds 2568 subwoofer in 1.4cf sealed box (5/8" MDF)
The sub has a 25mm one way excursion spec, and a 3 inch voice coil with a huge pole piece vent (easily over 1 inch), and it LOVES power.
Neither the 600 watts RMS I fed it from the MTX rt2400x or a 250 watt HT plate amp runnig in FREE AIR could bottom out this beast.
This sub loves small boxes and it loves power, so if you have 1500 watts RMS and want to put a sub in the corner of your trunk, this is it!
Used since the summer, and loved every minute of it.
In this large-ish box, the sound is extremely accurate, a bit lacking in midbass punch, but it makes up for it with deep, rear deck rattling bass.
It really puts out the lows quite well for a 12" sub, but it will show you detail that you've been missing with other subs.
It has a few dents in the aluminum cone from shuffling around inside my trunk and hitting things, but I've since taken out my spare tire and it sits there securely.
Because of the dents on the cone, the voice coil is slightly out of alignment and will rub a bit at high excursions, but you can't hear that inside the car even with the seats folded down.
Looking for $120cad ROCK SOLID FIRM for the sub and box... which is a pretty good deal considering this is a prototype version of the Eclipse Titanium 12" sub that sold for at least 4x that...








Wenger Authentic Swiss Military Watch.
Carbon blue face, brushed aluminum body and strap.
Smooth clasp that locks from both sides, not just one.
I would not sell this watch if it had a white face (not as fond of blue as I thought).
Worn once, and in EXCELLENT condition.
$210cad. NOW $180cad






Wenger Authentic Swiss Military Chronometer Watch.
Black face with an aluminum finish bezel and strap.
Double locking clasp that will never come loose.
Comes with the watch, retail display box and booklet.
Never worn, just tried on a couple times, in MINT condition.
$210cad. NOW $180cad










Parts Express 300-794 250 watt RMS @ 4ohms subwoofer plate amplifier
This is about 4 years old but in great shape. Used for maybe 100 hours in that time.
I removed the bass boost circuit and replaced it with a 100hz 12db/octave lowpass circuit.
This works in conjunction with the original knob-adjustable 12db/octave lowpass crossover, so if you set the knob to 100hz, you end up with a 100hz 24db/octave lowpass.
Current retail price is $120usd.... I'm asking $80cad. Will not ship. SOLD TO James A



AudioControl 4xs - SOLD TO A FRIEND

RCA 10 foot DVI to HDMI cable
I bought 2 of these about a year ago, but only used 1 to connect my Rogers HD Box to my 51" Toshiba HDTV.
It works fine and I've never, ever, experienced any picture breakup.
Looking for $25usd shipped.
SOLD TO 1.8T

Pair of North Creek Music D25 tweeters
Only used for a couple minutes, never mounted, in new condition. Bought as a matched pair for $38usd shipped.
Looking for $30usd shipped. SOLD TO KEN C


Numark DM1000X Preamp/Mixer.
Bought it to be used as a headphone amplifier, but within 5 days of purchasing it, the LED VU indicators would cut out, and then completely stopped working.
Then the headphone output would be scratchy.
The seller, even though offering a 7 day DOA warranty, would not take it back.
I could get the headphone output to work without scratchiness by jiggling the cord back and forth a bit, but it does get annoying.
I don't really want the extra output capability because I know I'm not judicial with the volume knob and I want to hear at age 25 ;)
Finally, I tried the RCA outputs a while ago and they work fine through either input. The crossfader worked fine as well.
Comes with a 9.2vac wall wart that I had to buy seperately from the mixer.
Looking for $25usd shipped... paid about $55susd. SOLD TO OL_PHART


Radeon x800 256mb Pro PCI-E video card.
New pull from a Gateway computer. Has a huge passive heatsink which handles even overclocked gaming in a closed case with no problem at all.
Best part is that you get fast graphics with no noise!
Has Samsung GC20 memory, and requires the 6 pin PCI-E power connector.
Overclocked it to 530mhz core and 1060mhz memory and got 5607 3dmark2005's with an AMD64 XP3000 running at 256x9 = 2.30ghz, with system memory @ 209mhz.
$190cad shipped firm. SOLD TO FLYINGPENGUIN


MTX rt2400x car amplifier
Missing one speaker wire screw, which I might be able to find in my car
Purchased off eBay in Sept of 2005. Works flawlessly, slams my 12" TC Sounds sub and dims my lights through my 4g power wire EASILY :)
Provided my front mids with OODLES of power and still sounded good too!
Looking for $150usd shipped. SOLD TO A FRIEND