Aiming Valkyrie Headlight and Driving Lights

The way I aim lights on the Valk is what I call the seventeen-two by thirty-five.

First I put the Valk seventeen feet from a wall then put straps tied off to level the Valk I level the handle bars by putting a level on top of the bars resting next to the clutch and brake reservoir. If you measure the center of the light it should be thirty seven inches. At the wall put a mark at thirty five inches, two down from what it was at the light, low beam should be centered on the mark. I adjust the driving lights just off to the out sides and a little lower. Works for me.

Cheers.

Jesse
PS. The distance from the wall I got from a motor cycle head light site, also the two inches down thingy.

Home Page | Modifications Page