Switching The AG42B Sight Presets

You might have discovered while reading the Owner's Manual that you can set the Ljungman's sights to either Spitzer (Pointed) or Ogival (Round Nose). I have put together this step-by-step walkthrough to better assist you in preforming this useful feature.

First, remove the top Handguard by pushing up the Rear Band Retainer and sliding the Rear Band forward and then pulling the Handguard toward the muzzle and off.

Next, locate and remove the Rear Sight Retaining pin and pull it towards the Muzzle to remove. It should release easily. (CAUTION: Be sure the Elivation Knob dosen't dislodge and become lost or damaged)

Now, remove the Elevation Knob and place it aside. You will notice two sets of numbers. 1~6 (for Round Nose) on the inner circle and 1~7 (for Pointed) on the outer.

(The "Spitzer" diagram appears on the left of the veiwing hole.)

Remove the Rear Sight Elevation Plate and turn it 180 degrees to the 2ed Setting and replace it. You will notice that a diagram of the slected Bullet type appears on either the left or right side of the viewing hole.

Replace the Elevation Knob, Retaining Pin, and Handguard. Your Rifle is now set to your desired Ammunition type.

Back To Main Page