Airgun Designs upgrade page

ANS automag bolt. Made by one of the best comapnies on the market. This would be my first choice in bolt for mags

The AGD mag retrovalve (more commonly known as the mag rt valve). Makes the mag ridiculously fast, defintately a key upgrade in mags. If you have a mag either this or a hyper frame is the way to go

32 degrees venturi bolt. Great aftermarket bolt, shoots well and is not to pricy.

Kapp mag foregrip. Vertical foregrip. Black finish, and comfortable to shoot and hold. Made by a very reliable company.

Kapp mag foregrip. Vertical foregrip in nice chrome finish. Comfortable to hold and shoot with.

Benchmark Gas thru foregrip. Runs air from asa thru vertical forefrip in front as a handle.

Automag vertical feed asa adapter. The little screw gets knocked through the body tube and screws to lock the vert. asa into place so that a foregrip can be installed or a tank of someone prefers to have a vertical tank setup. This is the chrome vertical adapter.

Automag vertical feed asa adapter. Allows for installation of front foregrip or tank in front instead of having hose line run round the back of the gun and to the botton of the handle. Same thing as the chrome vertical adapter but this is the black one.

32 degrees rear velocity adjuster. This allow someone to adjust their velocity by just a turn of a knob instead of having to stick an allen wrench in the back of the valve and adjust it.

The KAPP mag front foregrips. This gets knocked in where the vertical adapter would get knocked in and it brings the vertical adapter forward about three inches and allows a little bit more space in between the grip frame and the front foregrip. Comes in various colors; Blue, Green, Red, Purple, and a very nice Chrome.

The KAPP tourney locks for the automags, this basically locks the velocity on a mag so that it cannot be adjusted, which makes the gun tourney legal. Comes in various colors as blue, red, silver, black, purple, and green.

Smart parts vertical adapter, this allows for a front foregrip, x-chamber, or a regulator. Screw gets tapped though the body tube and locks the vertical adapter in place so that it does not move. Critical part in mag owners who want something in front

Powerlyte grip styx trigger frames. Thes are a good quality frame, with a sharp look, comes in both the single and double trgger for personal prefernece.

Benchmark 45 grip frames. Comes in a snadblasted black finish and a chrome finish. Have finger grooves. Nice frame for a decent cost, though for the quality dye is the overall way to go.

Dye mag 45 slide frame, comes in both single and double trigger. Dye is one of the highest qualities that you can get in a parts. Great frames and they are very comfortable to use.

Kapp mag 45 grip frame, Kapp makes some of the nicest aftermarket parts available out there today, Nice frame and has the finger grooves for extra comfort.

32 degrees 45 grip frame. Nice frame for an affordable cost, chrome finisg with finger grooves.

AGD 45 intellifeed grip frame. Easiest way to understand this is it allows an easy hookup to your hopper or warpfeed system for a mag for the sensor plate. For more info email us, this is a great frame and most likely my most preferred frame for a mag.

The smart parts agd powerfeed caps. Comes in splash colors red, green, black, and silver. Nice if you are going for a full splash gun look.

Smart Parts mag tourney locks, Same as the Kapp locks except in the splash color, from splash red, splash black, splash maroon, splash green, splash silver.

Smart Parts triggers for the Automags in the splash silver and in splash green.

Eclipse Automag Triggers. These are nice couble triggers that come from planet eclipse. I highly recommend anything from eclipse, the quality and reliability of parts is very high from them. Comes in bonzai splash green, bonzai splash electric sky blue, ice blue splash.

Smart Parts Eclipse Automag sight rail, in splash black, splash blue, and splash red.

Smart Parts Automag splash red and splash blue bottomlines.

The AGD ULE bodies for the automags, this is a high quality frame with autococker threading for the barrel. Light and very nice looking. Low rise with custom flame milling along with groove milling in the body tube. Available in black, blue, silver, purple, and red, all of which are in the metallic finish.

The reason there are so many different splash and multi colored parts is because, the automags are intended to be custom guns. They are designed to be completely adjusted to the owner and completely to their wants and specifications.