Tdot Tees Home 
do it


TDoT Tees


View Last Page Again !


How to Apply ?

Below are application instructions for different types of iron-on's. These instructions come with the item you purchased along with some extra samples of new stuff that you can use to try. If you need further help ??? contact us before you try it on your t-shirt . . . !!!

Solid Color Ink and Glitter Letters View Instructions


Iron-On Transfer Types

  • Fuzzy
  • Vinyl
  • Holographic
  • EZ-print
  • Vintage
  • Freestyle
  • Digital
  • Digital Opaque


  • Fuzzy Velvet Texture

    TRANSFER TYPE: FUZZY (Code F)
    These Transfers come on a Clear Pastic Carrier.

    HEAT PRESS MAY BE REQUIRED TO APPLY

    Take Application Instructions along with the Transfer to your local T-Shirt Store with a HEAT PRESS and let them Apply it for you for best results.

    You can use your Home Hand Iron when:
    the Transfer is Small/Medium size (up to 48 Square Inches ). Follow the HEAT PRESS Settings but Increase the Press Time to 15-20 Sec. and iron the entire transfer with even Heat and Pressure.

    This Transfer Prints on ALL Fabric Colors
    Works well on Cotton, Polyester, Denim, Fleece, Linen and Blends.
    DOES NOT PRINT on Nylon, Silk and fabrics of this type.

    HEAT PRESS-IRON APPLICATION

    1. Set Iron to 340F Degrees. (allow it to heat up to temp.)
    2. Pre-heat and smooth Printing Area.
    3. Place Transfer/Clear Plastic Carrier in desired position.
    4. Cover Entire Transfer w/Teflon or Craft Paper
    5. Press for 10-12 Sec. w/Firm Downward Pressure.
    6. Remove Teflon/Craft Paper.
    7. COLD PEEL - Allow to cool, than Peel Clear Plastic Carrier.

    IT WILL NOT WORK IF YOU PEEL IT HOT

    If the transfer is not sticking to the shirt, STOP. Increase the temperature, pressure, press time and try it again. That should do it.

    Washing & Care
    Machine washable, Wash inside out, warm/cold temperature, Tumble or Hang dry. All transfers are high quality and tested on a regular basis.


      | Top | View Last Page Again | Home |


    Vinyl (screen printed look)

    TRANSFER TYPE: VINYL (Code V)
    These Transfers come on a Clear Pastic Carrier.

    HEAT PRESS MAY BE REQUIRED TO APPLY

    Take Application Instructions along with the Transfer to your local T-Shirt Store with a HEAT PRESS and let them Apply it for you for best results.

    You can use your Home Hand Iron when:
    the Transfer is Small/Medium size (up to 48 Square Inches ). Follow the HEAT PRESS Settings but Increase the Press Time to 10-12 Sec. and iron the entire transfer with even Heat and Pressure.

    This Transfer Prints on ALL Fabric Colors
    Works well on Cotton, Polyester, Denim, Fleece, Linen and Blends.
    DOES NOT PRINT on Nylon, Silk and fabrics of this type.

    HEAT PRESS-IRON APPLICATION

    1. Set Iron to 340F Degrees. (allow it to heat up to temp.)
    2. Pre-heat and smooth Printing Area.
    3. Place Transfer/Clear Plastic Carrier in desired position.
    4. Cover Entire Transfer w/Teflon or Craft Paper
    5. Press for 6-8 Sec. w/Firm Downward Pressure.
    6. Remove Teflon/Craft Paper.
    7. HOT or COLD PEEL - Peel Clear Plastic Carrier.

    -

    If the transfer is not sticking to the shirt, STOP. Increase the temperature, pressure, press time and try it again. That should do it.

    Washing & Care
    Machine washable, Wash inside out, warm/cold temperature, Tumble or Hang dry. All transfers are high quality and tested on a regular basis.


      | Top | View Last Page Again | Home |


    Holographic (trippy glitter)

    TRANSFER TYPE: DECO GLITTER (Code DG)
    These Transfers come on a Clear Pastic Carrier.

    HEAT PRESS MAY BE REQUIRED TO APPLY

    Take Application Instructions along with the Transfer to your local T-Shirt Store with a HEAT PRESS and let them Apply it for you for best results.

    You can use your Home Hand Iron when:
    the Transfer is Small/Medium size (up to 48 Square Inches ). Follow the HEAT PRESS Settings but Increase the Press Time to 3-4 Sec. 1st.PRESS & 10-15 Sec. 2nd. PRESS and iron the entire transfer with even Heat and Pressure.

    This Transfer Prints on ALL Fabric Colors
    Works well on Cotton, Polyester, Denim, Fleece, Linen and Blends.
    DOES NOT PRINT on Nylon, Silk and fabrics of this type.

    HEAT PRESS-IRON APPLICATION

    1. Set Iron to 320F Degrees. (allow it to heat up to temp.)
    2. Pre-heat and smooth Printing Area.
    3. Place Transfer/Clear Plastic Carrier in desired position.
    4. Cover Entire Transfer w/Teflon or Craft Paper.
    5. 1st. Press for 2-3 Sec. w/Firm Downward Pressure.
    6. Remove Teflon/Craft Paper
    7. WARM PEEL - Peel Clear Plastic Carrier.
    8. Cover Entire Transfer w/Teflon or Craft Paper AGAIN.
    9. 2nd. Press for 8-10 Sec. w/Firm Downward Pressure.
    10. COLD PEEL - Allow to cool, Remove Teflon/Craft Paper.

    If the transfer is not sticking to the shirt, STOP. Increase the temperature, pressure, press time and try it again. That should do it.

    Washing & Care
    Machine washable, Wash inside out, warm/cold temperature, Tumble or Hang dry. All transfers are high quality and tested on a regular basis.


      | Top | View Last Page Again | Home |


    EZ-Print Ink (SOLID COLORS)

    TRANSFER TYPE: EZ-PRINT (Code EZ)

    HEAT PRESS MAY BE REQUIRED TO APPLY

    Take Application Instructions along with the Transfer to your local T-Shirt Store with a HEAT PRESS and let them Apply it for you for best results.

    You can use your Home Hand Iron when:
    the Transfer is Small/Medium size (up to 48 Square Inches ). Follow the HEAT PRESS Settings but Increase the Press time to 12-15 Seconds and iron the entire transfer with even Heat and Pressure.

    This Transfer Prints on ALL Fabric Colors
    Works well on Cotton, Polyester, Denim, Fleece, Linen and Blends.
    DOES NOT PRINT on Nylon, Silk and fabrics of this type.

    HEAT PRESS-IRON APPLICATION

    1. Set Iron to 375F Degrees. (allow it to heat up to temp.)
    2. Pre-heat and smooth Printing Area.
    3. Place Transfer in desired position Facing Down.
    4. Press for 8-10 Sec. w/Firm Downward Pressure.
    5. HOT PEEL - Peel immediately. For Dark Fabrics, wait 2 sec. than Peel

    IT WILL NOT WORK IF YOU LET IT COOL BEFORE YOU PEEL

    If the transfer is not sticking to the shirt, STOP. Increase the temperature, pressure, press time and try it again.
    That should do it.

    Washing & Care Machine washable, Wash inside out, warm/cold temperature, Tumble or Hang dry.
    All transfers are high quality and tested on a regular basis.


      | Top | View Last Page Again | Home |


    Vintage

    TRANSFER TYPE: VINTAGE-LITHO (Code VL)

    HEAT PRESS REQUIRED TO APPLY

    DO NOT USE HOME HAND IRON TO APPLY


    Take Application Instructions along with the Transfer to your local T-Shirt Store with a HEAT PRESS and let them Apply it for you for best results.

    This Transfer Prints on ALL Fabric Colors
    Works well on Cotton, Polyester, Denim, Fleece, Linen and Blends.
    DOES NOT PRINT on Nylon, Silk and fabrics of this type.

    HEAT PRESS-IRON APPLICATION

    1. Set Iron to 375F Degrees. (allow it to heat up to temp.)
    2. Pre-heat and smooth Printing Area.
    3. Place Transfer in desired position Facing Down.
    4. Press for 12-18 Sec. w/Firm High Pressure.
    5. COLD PEEL - Allow it to cool before you peel.

    IT WILL NOT WORK IF YOU PEEL IT HOT

    Washing & Care Machine washable, Wash inside out, warm/cold temperature, Tumble or Hang dry.
    All transfers are high quality and tested on a regular basis.


      | Top | View Last Page Again | Home |


    FreeStyle

    Iron-on Materials by the yard come on a clear plastic carrier sheet. You can Draw or Trace your designs on the clear plastic carrier sheet or on the backside of the iron-on material ( note that if you create on the back side you designs need to be in mirror image).

    Before you start drawing your designs, peel a little material off on one corner from the clear plastic carrier to see and feel what the material is like. After you draw/trace your designs on the Plastic Carrier or on the Backside of the Material, you now are ready to cut out the designs. Cut your designs out as you would like them to be.

    Peel off your designs from the Clear Plastic Carrier and lay them out on the Garment ( T-Shirts etc. ) with the Material ADHESIVE SIDE FACING DOWN in desired position. You are now ready to Iron your designs. With a HOME HAND IRON it is best to Iron Small Areas at a time.

    1. Pre-Heat you Iron to 375F degrees. ( Hottest Setting )
    2. Place Craft Paper Protector Sheet over your Design.
    3. Iron it for 10-12 sec. with firm downward presure.
    4. Let it cool and remove Craft Paper Protector Sheet.

    note: If it's not sticking to the garment, try it again but INCREASE the iron heat, downward pressure and press time. That should do it.



      | Top | View Last Page Again | Home |


    Digital

    TRANSFER TYPE: DIGITAL (Code D)

    HEAT PRESS MAY BE REQUIRED TO APPLY

    Take Application Instructions along with the Transfer to your local T-Shirt Store with a HEAT PRESS and let them Apply it for you for best results.

    You can use your Home Hand Iron when:
    the Transfer is Small/Medium size (up to 8.5"X11" Inches ). Follow the HEAT PRESS Settings but Increase the Press time to 15-20 Seconds and iron the entire transfer with even Heat and Pressure.

    This Transfer Prints on LIGHT Fabric Colors ONLY
    Works well on Cotton, Polyester and Blends.
    DOES NOT PRINT on Nylon, Silk and fabrics of this type.

    HEAT PRESS-IRON APPLICATION

    1. Set Iron to 375F Degrees. (allow it to heat up to temp.)
    2. Pre-heat and smooth Printing Area.
    3. Place Transfer in desired position Facing Down.
    4. Press for 10-12 Sec. w/Firm Downward Pressure.
    5. HOT PEEL - Peel immediately.

    IT WILL NOT WORK IF YOU LET IT COOL BEFORE YOU PEEL

    If the transfer is not sticking to the shirt, STOP. Increase the temperature, pressure, press time and try it again.
    That should do it.

    Washing & Care Machine washable, Wash inside out, warm/cold temperature, Tumble or Hang dry.
    All transfers are high quality and tested on a regular basis.


      | Top | View Last Page Again | Home |


    Digital Opaque

    TRANSFER TYPE: DIGITAL OPAQUE (Code DO)

    HEAT PRESS MAY BE REQUIRED TO APPLY

    Take Application Instructions along with the Transfer to your local T-Shirt Store with a HEAT PRESS and let them Apply it for you for best results.

    You can use your Home Hand Iron when:
    the Transfer is Small/Medium size (up to 6"X9" Inches ). Follow the HEAT PRESS Settings but Increase the Press time to 20-25 Seconds and iron the entire transfer with even Heat and Pressure.

    This Transfer Prints on ALL Fabric Colors
    Works well on Cotton, Polyester, Denim, Linen, Fleece and Blends.
    DOES NOT PRINT on Nylon, Silk and fabrics of this type.

    TEFLON SHEET REQUIRED FOR APPLICATION

    HEAT PRESS-IRON APPLICATION

    1. Set Iron to 375F Degrees. (allow it to heat up to temp.)
    2. Pre-heat and smooth Printing Area.
    3. Peel Off Paper Backing.
    4. Place Transfer in desired position Facing UP.
    5. Cover Entire Transfer with TEFLON SHEET.
    6. Press for 15-18 Sec. w/Firm Downward Pressure.
    7. COLD PEEL - Allow to cool than remove Teflon.

    If the transfer is not sticking to the shirt, STOP. Increase the temperature, pressure, press time and try it again.
    That should do it.

    Washing & Care Machine washable, Wash inside out, warm/cold temperature, Tumble or Hang dry.
    All transfers are high quality and tested on a regular basis.


      | Top | View Last Page Again | Home |

    TDOT TEES © All rights reserved.