================================
Rewinding Yarn Onto Smaller Packages

================================

>I recently bought some very large cones of warp. I need to wind them onto
>smaller cones. Are there  "cones" available to buy for this (cardboard or
>otherwise), or does any one make their own and what do you use?
-------------
I use a yarn "ball" maker. The yarn feeds from the center of the "ball".

Orin
-------------
I am not sure just how you will be using these, but I wind off from the spinning wheel by slipping a TP roll on the winder.

Brucie
-------------
I went to the hardware store and bought a 10' length of 1/2" PVC pipe. I cut it on the table saw into 4" lengths the same as the Maysville tubes and filed the ends just a tad. Just wrapped the warp around on itself a couple of times and then onto an improvised bobbin winder.

Kathy
-------------
http://www.oocities.org/rugtalk