RE-GEAR to 4.56 and a rear
locker |
A snorkel kit using a bonnet
from a Dakota 5.2L (PT# 4883598AA) and cover (PT# 53031760AB) or
2002 Dodge Ram 1500 which uses 4 inch intake and mounts to the
same throttle body and then 3 ¾ inch Exhaust tubing to run it out
of the engine compartment. I
am still trying to figure out how it get a filter in the system
and still keep it sealed as well as a good pre-breather |
Second Battery (Diesel
battery tray for passenger side mount) |
DT
track Bar |
Rear winch…receiver type
9000lb or M12000 mounted under box behind plate |
Custom rear bumper with swing
down tire carrier to carry a 38 spare and have dual rear jacking
and towing points. |
38’s or 40’s eventually
hopefully 44's one day |
Custom front Radius Arms to
allow for more flex and larger lift to be installed |
Custom rear springs or four
link rear |
Re-locate the rear shocks |
Rear Trackbar |
Eventual Engine,Tranny,
Transfer Case when the stock ones fail they will be upgraded to
360/NV4500/241or205/ |
And I am sure this will
change 100 times before I finish anything or start anything
|