Download TermForce.TermForce from www.ruksun.com
and install on iPaq.
Download GismoUtility.exe to host PC, copy,
and paste in to /My Device/Program Files/ on iPacq.
(Use ActiveSync/Explore)
Download Firmware "Firmware_version532a.zip" and unzip on the host
PC,
copy (the file) X532A.dwl,
paste in to Personal directory on iPaq.
Download GiSMOSetup.exe to host PC, dubbel klick to install.
The module must be turned on to be upgraded. This is normally done by starting
the
GiSMOPhone application.
To start the module without the GismoPhone application use GismoUtility
*************************************************************
NOTE: Make sure external power is connected during the upgrade.
*************************************************************
>> Start GismoUtility
Mark the Gsm on box and press set
{the green led should start to blink}
>> Close GismoUtility
>>Start TermForce
-> File->Create Session
session name : NAME
comport : A_BRAND_NEW_WORLD_.......
phone no : x (any)
->configure
baudrate : 9600
databits : 8
stopbits : 1
flowcontrol : hardware
X enterdialingcommands manually
-> OK
-> OK
-> File->Open Session
Session : NAME
-> OK
-> OK
-> Call->connect
->Yes
{ A terminal window will appear }
write : at
response should be : OK
( if no response, restart with another baudrate. probaly 38400 )
write : at+wdwl
response should be : +wdwl: 0
{ The module is now ready to be programmed }
-> OK
{ dialing status will appear}
-> OK
-> Call->Send File
-> Browse for file: pro-lib,: X532A.dwl
-> Send
{ The firmware will now be upgraded takes about 20-30 min }
{ When ready! reset Ipaq }
FINISHED!!
----------------------------------------------
Eko
at e1
FirmwareVersion
at i3
------------------------------------------------