Back to index of sports pages by Donald Sauter.
The problem with softball is baseball.
(Now what's he mean by that???)
People see baseball on television, probably from before they even learn to talk, and figure, "That's the way a bat and ball game has to be! Mmm hmmm, absolute perfection!" Then when they go to get up a game of softball with relatives or friends or other neighborhood kids, emulating what they see on tv is paramount.
In particular, people view the size of the teams, the number of bases and the 90 degree angle between foul lines as sacred. Well, if you don't have 18 people handy, something has to give. And lo, there arose such silliness such as imaginary base-runners; an outfield declared foul; and "pitcher's mound rule", where the ball is thrown to the pitcher's mound to get a runner out at first.
C'mon people! The fundamental essence of the game is a race between runners representing the offensive team, and a ball under the control of the defensive team. If the ball and the runner are going to different destinations, what you have is utter nonsense.
Or, the kids just throw in the towel on having a real game and play "three flies in", or some variant where you score points by hitting the ball from out of your hand. We played a variant called "two at bat" that sort of worked, but players were always running themselves to death just changing places between outfielder and batter.
My humble suggestion for having a perfectly good, valid, fun, satisfying, and real game of softball is to simply adjust the foul lines and the number of bases for the number of players you have. The number of bases and the foul line angle are not fundamental to the sport.
For example, if you have 6 players, you might lay out the field like this with foul lines separated by about 45 degrees.
\ outfielder /
\ * /
\ /
\ /
\ /
\ infielder /
\ * /
\ /
\ /\/
\ \/ base
\ pitcher /
\ * /
\ /
\ /
\ /
\ /
\/\/
\/ home
The base path is simply home to (first) base to home. The pitcher can easily cover either one. Note also that there is nothing sacred about a pitcher's mound. In our softball game, the pitcher may pitch from any reasonable spot within fair territory. Depending on the friendliness of the game, he might stand where the batter requests. For example, a left-handed batter who pulls the ball might want the pitcher to pitch from near the left-field foul line.
Even in this pared-way-down 6-man game, you could set up another base somewhere on the left-field foul line. There would still be a batter when bases are loaded.
If you only have 5 players, a typical solution is for one player to be an all-time fielder (maybe pitcher). In that case, the batting team only has 2 members and one base is the reasonable maximum.
Playing softball with so few people may sound bizarre. I've met people who refused to give it a go, even when we were standing right there next to the field with all the equipment and in spite of my pleadings. Gotta have 18 guys, like on tv, I guess.
If you try it, you might be surprised to find it a superior game, even. It maintains all the elements of the "real" game - plus everyone is much more involved all the time.
It's not hard to extend this down to 3 players. Then the batter would be obligated to hit a home run every time. I don't pretend this extreme makes for a very good game - everybody is running almost all the time! You'd want a pretty dead ball.
Of course, if you have more players, just open up the foul lines and increase the number of bases accordingly. For two 4-man teams, a logical setup would be something like 60 degree foul lines, 2 bases, with a pitcher, infielder and 2 outfielders.
Starting at 5-man teams, you would set out all 4 bases (including home). With 70 degree foul lines, the pitcher, 2 infielders and 2 outfielders can cover everything. If you lay out equal-lengthed base paths there will be a hair-pin turn at second base, but that's no big deal - 90 degree angles are not essential.
So that's how to have great softball games with small teams. But you're not through with me yet. Here are a few more ideas born of many years of sandlot softball.
Strikes. Once again, emulation raises its frightening head. Just because the big boys on tv get 3 strikes doesn't mean it has to carry over to softball. Think about it. Hitting a baseball flying by at 90 miles and hour is one thing; hitting a big, fat softball just floating up is another. My recommendation: you get one swing in slow-pitch softball. A miss or a foul is an out. That's not unreasonable, is it?
Keeping the ball fair is not hard at all in softball. If you risk placing it just inside a foul line, you accept the responsibility for goofing up - which is as it should be. Besides, who wants to spend the afternoon chasing down foul ball after foul ball?
Of course, the number of strikes, including fouls, can be adjusted according to player ability. Little kids would have no limit.
Leads. Another instance where emulation is insanity. In this case, it isn't even clear to me why there are leads in baseball. Why should a runner be part of the way to the next base before the play even starts??? I don't know what the official softball rules say about leads, but I know that softball players have a variety of ideas. Some think you may leave the base when the ball leaves the pitcher's hand, or when the ball reaches the plate (however that is determined.) From a philosophical point of view, it seems obvious that the offensive team's runners should not be allowed to move until the offensive team's batter has set the ball in motion. Obvious to me, at least.
There is another big difference between professional baseball and recreational softball that is not so much rule-related, but ability-related. That is that the professionals are very capable throwers, while the rest of humanity is abysmal in this regard. If you observe an amateur softball game, you will see that most runs are scored not because of successful hitting (which is how it should be), but courtesy of lunatic throwing by the fielding team.
The batter hits a ball to the shortstop. The shortstop throws it over the head of the first baseman. The runner goes to second. He dances around out there hoping to draw another throw. The first baseman takes the bait. He throws at second. The ball lands who knows where. The runner helps himself to another base. This goes on and on, turning the most miserable little grounders into doubles, triples and home runs.
That's not what the game is about, folks. A perfect solution to this problem may be a bit elusive, but we can take steps in the right direction. For a start, runners may not advance on an overthrow. You should be happy they didn't get you out, pal!
Next, whenever the fielding team gets anyone out, the play stops. This means no tagging up after a fly out - and good riddance to that wackiness. (I know, I know... they do it on tv!) This means no throwing the ball into the woods trying for the second out of a double play. It means no double plays, period. Big whoop. Normally executed double plays are rare birds in amateur softball, anyway.
The next suggestion is a little fuzzier - perhaps easier to say then to implement. The play stops when the fielding team gets the ball back to the pitcher. For example, this would give the fielding team the option of just letting a run score uncontested instead of trying to make a play at home plate - and allowing other runners to advance willy-nilly in the process.
The problem, of course, is deciding who may advance and who has to return to the previous base when the pitcher yells "Halt!" Halfway should be enough to allow advancement, but who's to say if a runner was halfway? You could have halfway markers between bases. In any case, if it's a social, non-cutthroat game, this shouldn't be a problem.
Notice that if these ideas are implemented, a play in softball has clearly defined start and stop points. It starts with the crack of the bat and ends with an out, or an overthrow into foul territory, or the pitcher regaining the ball. Isn't that much more satisfying and sensible than in baseball where the plays sort of drift amorphously into each other? (I've never figured out, for example, what prevents a runner from taking an 89.5 foot "lead" after a foul ball, and when the umpire throws in a new ball, just stepping on the next base. Don't tell me a runner has to be on his base when the ump throws a ball in.)
You think that was great? Visit my croquet page!
Note: This is NOT the OFFICIAL SOFTBALL RULES. You, of course, know it is not the OFFICIAL SOFTBALL RULES. I mention that explicitly in the hopes of snagging anybody who is looking for OFFICIAL SOFTBALL RULES.
Note to readers from after the fall of the US empire:
1 foot = 12 inches = 12 x 2.54 cm.
Date: Jan 2002
From: Fancypants89
Subject: softball sight
what you said stinks looser
[Geez, what did I say now? DS]
Contact Donald Sauter: send an email; view guestbook; sign guestbook.
Back to
Donald Sauter's main page.
Back to the top of this page.
Parents, if you're considering tutoring or supplemental education for your child, you may be interested in my observations on Kumon.