Hot Rod Parts for my Chevy Celebrity
		These speed parts are stuff I have made,and others I need to buy,all in the sake of making my  1984 Celebrity faster,and more stable (safer)
							This is a stock intake,that I opened up the plenum on a milling machine,filled-up the EGR passages with special aircraft epoxy,and made an adaptor for a four barrel carburator with a 1" thick piece of T6061 aluminum plate. The adaptor simply bolts where the 2 barrel carb was,and a square bore shape was machined to accept a 390CFM Holley carburator. The busted engine under it will be rebuild using all the speed parts available for the 60° Chevy engine.
			That sway bar was taking dust in my garage for more than 10 years before I decided it would work under my rear axle.It was originally in front of my '75 Chevelle wagon,Most bracket&bushings were taken on an '87 Celeb cradle I have lying around,trailing arms bracket for the end links were made at the shop,other plates in my garage. Since this 7/8" sway bar is installed,the car stays leveled under hard cornerings,and the side movement from the panhard rod has been eleminated,a perfect improvement for speed bumps at full speed!:)
							These are my 1" rear wheel spacer. They will be installed between the axle and bearings. 2 more inches of track width should give a better stance with 16" wheels and an already low and stiff suspension.On the background lies a 3/4" carburator spacer for the stock E2SE carburator on the 2.8V6.
			The engine should make about 200+HP,but this additive should be perfect for those big cubes contender. A conservative shot should give 75 more HP,but this system can give 150 more HP :)